资源类型

期刊论文 94

年份

2023 6

2022 7

2021 8

2020 7

2019 3

2018 3

2017 4

2016 5

2015 3

2014 5

2013 5

2012 4

2011 4

2010 4

2009 5

2008 4

2007 2

2006 2

2005 5

2004 1

展开 ︾

关键词

圆柱 2

裂缝 2

ANSYS 1

COVID-19 1

k-ε模型 1

“∞”形 1

三维有限元 1

临时矿壁 1

互花米草 1

五螺箍 1

井壁监测 1

井壁稳定 1

井帮位移 1

传热过程 1

体外预应力 1

促淤固土 1

充填体 1

关键技术创新 1

冻结壁 1

展开 ︾

检索范围：

排序： 展示方式：

Seismic response of precast reinforced concrete wall subjected to cyclic in-plane and constant out-of-plane

《结构与土木工程前沿（英文）》 2021年 第15卷 第5期   页码 1128-1143 doi: 10.1007/s11709-021-0753-5

摘要： This paper provides insight into the seismic behavior of a full-scale precast reinforced concrete wall under in-plane cyclic loading combined with out-of-plane loading replicated by sand backfill to simulate the actual condition of basement walls. The tested wall exhibited flexural cracks, owing to the high aspect ratio and considerable out-of-plane movement due to lateral pressure from the backfill. The wall performed satisfactorily by exhibiting competent seismic parameters and deformation characteristics governed by its ductile response in the nonlinear phase during the test with smaller residual drift. Numerical analysis was conducted to validate experimental findings, which complied with each other. The numerical model was used to conduct parametric studies to study the effect of backfill density and aspect ratio on seismic response of the proposed precast wall system. The in-plane capacity of walls reduced, while deformation characteristics were unaffected by the increase in backfill density. An increase in aspect ratio leads to a reduction in in-plane capacity and an increase in drift. Curves between the ratio of in-plane yield capacity and design shear load of walls are proposed for the backfill density, which may be adopted to determine the in-plane yield capacity of the basement walls based on their design shear.

关键词： precast wall     basement wall     out-of-plane response     quasi-static test     sand backfill     seismic parameters    

HTML PDF 收藏

Effect of earth reinforcement, soil properties and wall properties on bridge MSE walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第5期   页码 1209-1221 doi: 10.1007/s11709-021-0764-2

摘要： Mechanically stabilized earth (MSE) retaining walls are popular for highway bridge structures. They have precast concrete panels attached to earth reinforcement. The panels are designed to have some lateral movement. However, in some cases, excessive movement and even complete dislocation of the panels have been observed. In this study, 3-D numerical modeling involving an existing MSE wall was undertaken to investigate various wall parameters. The effects of pore pressure, soil cohesion, earth reinforcement type and length, breakage/slippage of reinforcement and concrete strength, were examined. Results showed that the wall movement is affected by soil pore pressure and reinforcement integrity and length, and unaffected by concrete strength. Soil cohesion has a minor effect, while the movement increased by 13–20 mm for flexible geogrid reinforced walls compared with the steel grid walls. The steel grid stresses were below yielding, while the geogrid experienced significant stresses without rupture. Geogrid reinforcement may be used taking account of slippage resistance and wall movement. If steel grid is used, non-cohesive soil is recommended to minimize corrosion. Proper soil drainage is important for control of pore pressure.

关键词： mechanically stabilized earth walls     precast concrete panels     backfill soil     finite element modeling     earth reinforcement    

HTML PDF 收藏

Self-centring segmental retaining walls—A new construction system for retaining walls

《结构与土木工程前沿（英文）》 2021年 第15卷 第4期   页码 980-1000 doi: 10.1007/s11709-021-0737-5

摘要： This paper reports on an experimental study on a new self-centring retaining wall system. Four post-tensioned segmental retaining walls (PSRWs) were experimentally tested. Each of the walls was constructed using seven T-shaped concrete segments with a dry stack. The walls were tested under incrementally increasing cyclic lateral load. The effect of the wall height, levels of post-tensioning (PT) force, and bonded versus unbonded condition of PT reinforcement on the structural behavior of the PSRWs was investigated. The results showed that such PSRWs are structurally adequate for water retaining structures. According to the results, increasing the wall height decreases initial strength but increases the deformation capacity of the wall. The larger deformation capacity and ductility of PSRW make it a suitable structural system for fluctuating loads or deformation, e.g., seawall. It was also found that increasing the PT force increases the wall’s stiffness; however, reduces its ductility. The residual drift and the extent of damage of the unbonded PSRWs were significantly smaller than those of the bonded ones. Results suggest that this newly developed self-centring retaining wall can be a suitable structural system to retain lateral loads. Due to its unique deformation capacity and self-centring behavior, it can potentially be used for seawall application.

关键词： retaining wall     segmental     precast concrete     unbonded post-tensioning     water retaining wall     seawall    

HTML PDF 收藏

Factors affecting the seismic behavior of segmental precast bridge columns

Haitham DAWOOD,Mohamed ELGAWADY,Joshua HEWES

《结构与土木工程前沿（英文）》 2014年 第8卷 第4期   页码 388-398 doi: 10.1007/s11709-014-0264-8

摘要： This manuscript discusses the design parameters that potentially affect the lateral seismic response of segmental precast post-tensioned bridge piers. The piers consist of precast circular cross section segments stacked one on top of the other with concentric tendons passing through ducts made in the segments during casting. The bottommost segments of the piers were encased in steel tubes to enhance ductility and minimize damage. An FE model was used to investigate different design parameters and how they influence the lateral force – displacement response of the piers. Design parameters investigated included the initial post-tensioning stress as a percentage of the tendon yield stress, the applied axial stresses on concrete due to post-tensioning, pier aspect ratios, construction details, steel tube thicknesses, and internal mild steel rebar added as energy dissipaters. Based on the data presented, an initial tendon stress in the range of 40%-60% of its yield stress and initial axial stress on concrete of approximately 20% of the concrete’s characteristic strength is appropriate for most typical designs. These design values will prevent tendon yielding until lateral drift angle reaches approximately 4.5%. Changing the steel tube thickness, height, or a combination of both proved to be an effective parameter that may be used to reach a target performance level at a specific seismic zone.

关键词： finite element analysis     concrete     precast units     bridges    

HTML PDF 收藏

Seismic performance of precast hollow bridge piers with different construction details

Zhiqiang WANG,Jiping GE,Hongyi WEI

《结构与土木工程前沿（英文）》 2014年 第8卷 第4期   页码 399-413 doi: 10.1007/s11709-014-0273-7

摘要： Currently the design scheme of precast hollow concrete bridge piers will be adopted in bridge design in China, but there is no code including specific design details of precast segmental piers in high seismic risk area. For comparative study of seismic performance of the hollow bridge piers which had different design details, six specimens of hollow section bridge pier were designed and tested. The specimens consist of the monolithic cast-in-place concrete bridge pier, precast segmental prestressed pier with cast-in-place joint and precast segmental concrete bridge pier with dry joints. Results show that all specimens have good displacement capacity. The bridge pier with bonded prestressed strands exhibits better energy dissipation capacity and higher strength. The un-bonded prestressed strand bridge pier displays less residual plastic displacement and energy dissipation capacity. The bridge pier with both bonded prestressed strands at the edge of the section and un-bonded in the center of the section not only exhibits more ductility capacity and less residual plastic displacement, but also shows better energy dissipation capacity. Compared with experimental results of prestressed bridge columns, analytical result demonstrates the developed numerical analysis model would provide the reasonable and accurate results.

关键词： hollow pier     seismic performance     cyclic load     precast concrete     bridge columns    

HTML PDF 收藏

Ductility improvement of GFRP-RC beams using precast confined concrete block in compression zone

《结构与土木工程前沿（英文）》 doi: 10.1007/s11709-023-0968-8

摘要： Fiber-reinforced polymers (FRPs) have received considerable research attention because of their high strength, corrosion resistance, and low weight. However, owing to the lack of ductility in this material and the quasi-brittle behavior of concrete, FRP-reinforced concrete (FRP-RC) beams, even with flexural failure, do not fail in a ductile manner. Because the limited deformation capacity of FRP-RC beams depends on the ductility of their compression zones, the present study proposes using a precast confined concrete block (PCCB) in the compression zone to improve the ductility of the beams. A control beam and four beams with different PCCBs were cast and tested under four-point bending conditions. The control beam failed due to shear, and the PCCBs exhibited different confinements and perforations. The goal was to find an appropriate PCCB for use in the compression zone of the beams, which not only improved the ductility but also changed the failure mode of the beams from shear to flexural. Among the employed blocks, a ductile PCCB with low equivalent compressive strength increased the ductility ratio of the beam to twice that of the control beam. The beam failed in pure flexure with considerable deformation capacity and without significant stiffness reduction.

关键词： ductility     four-point bending test     glass fiber-reinforced polymer     precast confined concrete block    

HTML PDF 收藏

Flexural and longitudinal shear performance of precast lightweight steel–ultra-high performance concrete

《结构与土木工程前沿（英文）》 2023年 第17卷 第5期   页码 704-721 doi: 10.1007/s11709-023-0941-6

摘要： In this study, the flexural and longitudinal shear performances of two types of precast lightweight steel–ultra-high performance concrete (UHPC) composite beams are investigated, where a cluster UHPC slab (CUS) and a normal UHPC slab (NUS) are connected to a steel beam using headed studs through discontinuous shear pockets and full-length shear pockets, respectively. Results show that the longitudinal shear force of the CUS is greater than that of the NUS, whereas the interfacial slip of the former is smaller. Owing to its better integrity, the CUS exhibits greater flexural stiffness and a higher ultimate bearing capacity than the NUS. To further optimize the design parameters of the CUS, a parametric study is conducted to investigate their effects on the flexural and longitudinal shear performances. The square shear pocket is shown to be more applicable for the CUS, as the optimal spacing between two shear pockets is 650 mm. Moreover, a design method for transverse reinforcement is proposed; the transverse reinforcement is used to withstand the splitting force caused by studs in the shear pocket and prevent the UHPC slab from cracking. According to calculation results, the transverse reinforcement can be canceled when the compressive strength of UHPC is 150 MPa and the volume fraction of steel fiber exceeds 2.0%.

关键词： precast steel–UHPC composite beam     flexural performance     longitudinal shear performance     parametric study     transverse reinforcement ratio    

HTML PDF 收藏

Dynamic response of precast segmental bridge columns under heavy truck impact

《结构与土木工程前沿（英文）》 2023年 第17卷 第3期   页码 327-349 doi: 10.1007/s11709-023-0911-z

摘要： Considering the wide application of precast segmental bridge columns (PSBCs) in engineering practice, impact-resistant performance has gained significant attention. However, few studies have focused on PSBCs subjected to high-energy impacts caused by heavy truck collisions. Therefore, the behavior of PSBCs under a heavy truck impact was investigated in this study using high-fidelity finite element (FE) models. The detailed FE modeling methods of the PSBCs and heavy trucks were validated against experimental tests. The validated modeling methods were employed to simulate collisions between PSBCs and heavy trucks. The simulation results demonstrated that the engine and cargo caused two major peak impact forces during collision. Subsequently, the impact force, failure mode, displacement, and internal force of the PSBCs under heavy truck impacts were scrutinized. An extensive study was performed to assess the influence of the section size, truck weight, impact velocity, and number of precast segments on the impact responses. The truck weight was found to have a minor effect on the engine impact force. Damage was found to be localized at the bottom of the three segments, with the top remaining primarily undamaged. This parametric study demonstrated that larger cross-sections may be a preferred option to protect PSBCs against the impact of heavy trucks.

关键词： precast segmental bridge columns     heavy truck     collision     dynamic response    

HTML PDF 收藏

Structural performance of a façade precast concrete sandwich panel enabled by a bar-type basalt fiber-reinforced

《结构与土木工程前沿（英文）》 2023年 第17卷 第1期   页码 122-137 doi: 10.1007/s11709-022-0894-1

摘要： In this study, a novel diagonally inserted bar-type basalt fiber reinforced polymer (BFRP) connector was proposed, aiming to achieve both construction convenience and partially composite behavior in precast concrete sandwich panels (PCSPs). First, pull-out tests were conducted to evaluate the anchoring performance of the connector in concrete after exposure to different temperatures. Thereafter, direct shear tests were conducted to investigate the shear performance of the connector. After the test on the individual performance of the connector, five façade PCSP specimens with the bar-type BFRP connector were fabricated, and the out-of-plane flexural performance was tested under a uniformly distributed load. The investigating parameters included the panel length, opening condition, and boundary condition. The results obtained in this study primarily indicated that 1) the bar-type BFRP connector can achieve a reliable anchorage system in concrete; 2) the bar-type BFRP connector can offer sufficient stiffness and capacity to achieve a partially composite PCSP; 3) the boundary condition of the panel considerably influenced the out-of-plane flexural performance and composite action of the investigated façade PCSP.

关键词： precast concrete sandwich panel     basalt fiber reinforced polymer     pull-out performance     shear performance     out-of-plane flexural performance    

HTML PDF 收藏

Construction Technology of Off-Site Precast Concrete Buildings

Ting Gong,Jian Yang,Hao Hu,Feng Xu

《工程管理前沿（英文）》 2015年 第2卷 第2期   页码 122-124 doi: 10.15302/J-FEM-2015039

摘要： The industrialization of building construction is gradually becoming a new choice of construction technology driven by some great advantages such as high efficiency in construction, low energy consumption and environmental friendliness. Construction management plays an important part to ensure the quality of projects. A comparison between traditional on-site and modern off-site construction methods has been conducted. The streamlining of the process including the fabrication, transportation, stacking and assembling of precast components has also been analyzed with a discussion on the BIM application in the process.

关键词： off-site construction     precast concrete     modular construction     construction management     building information model (BIM)    

HTML PDF 收藏

Numerical simulation of squat reinforced concrete wall strengthened by FRP composite material

Ali KEZMANE,Said BOUKAIS,Mohand Hamizi

《结构与土木工程前沿（英文）》 2016年 第10卷 第4期   页码 445-455 doi: 10.1007/s11709-016-0339-9

摘要： The advanced design rules and the latest known earthquakes, have imposed a strengthening of reinforced concrete structures. Many research works and practical achievements of the application of the external reinforcement by using FRP composite materials have been particularly developed in the recent years. This type of strengthening seems promising for the seismic reinforcement of buildings. Among of the components of structures that could affect the stability of the structure in case of an earthquake is the reinforced concrete walls, which require in many cases a strengthening, especially in case where the diagonal cracks can be developed. The intent of this paper is to present a numerical simulation of squat reinforced concrete wall strengthened by FRP composite material (carbon fiber epoxy). The intent of this study is to perform finite element model to investigate the effects of such reinforcement in the squat reinforced concrete walls. Taking advantage of a commercial finite element package ABAQUS code, three-dimensional numerical simulations were performed, addressing the parameters associated with the squat reinforced concrete walls. An elasto-plastic damage model material is used for concrete, for steel, an elastic-plastic behavior is adopted, and the FRP composite is considered unidirectional and orthotropic. The obtained results in terms of displacements, stresses, damage illustrate clearly the importance of this strengthening strategy.

关键词： simulation     strengthening     reinforced concrete wall     squat wall     FRP composite material     damage     Abaqus    

HTML PDF 收藏

Nonlinear analysis of pre-tensioned glass wall facade by stability function with initial imperfection

Siu-Lai CHAN, Yaopeng LIU, Andy LEE,

《结构与土木工程前沿（英文）》 2010年 第4卷 第3期   页码 376-382 doi: 10.1007/s11709-010-0086-2

摘要： Pre-tensioned high strength trusses using alloy steel bar are widely used as glass wall supporting systems because of the high degree of transparency. The breakage of glass panes in this type of system occurs occasionally, likely to be due to error in design and analysis in addition to other factors like glass impurity and stress concentration around opening in a spider system. Most design does not consider the flexibility of supports from finite stiffness of supporting steel or reinforced concrete beams. The resistance of lateral wind pressure of the system makes use of high tension force coupled with the large deflection effect, both of which are affected by many parameters not generally considered in conventional structures. In the design, one must therefore give a careful consideration on various effects, such as support settlement due to live loads and material creep, temperature change, pre-tension force, and wind pressure. It is not uncommon to see many similar glass wall systems fail in the wind load test chambers under a design wind speed. This paper presents a rigorous analysis and design of this type of structural systems used in a project in Hong Kong, China. The stability function with initial curvature is used in place of the cubic function, which is only accurate for linear analysis. The considerations and analysis techniques are believed to be of value to engineers involved in the design of the structural systems behaving nonlinearly.

关键词： tension system     glass wall     nonlinear analysis     pre-tensioning     second-order analysis    

HTML PDF 收藏

Diaphragm wall-soil-cap interaction in rectangular-closed- diaphragm-wall bridge foundations

Hua WEN, Qiangong CHENG, Fanchao MENG, Xiaodong CHEN

《结构与土木工程前沿（英文）》 2009年 第3卷 第1期   页码 93-100 doi: 10.1007/s11709-009-0015-4

摘要： Rectangular-closed-diaphragm-wall foundation is a new type of bridge foundation. Diaphragm wall-soil-cap interaction was studied using a model test. It was observed that the distribution of soil resistance under the cap is not homogeneous. The soil resistance in the corner under the cap is larger than that in the border; and that in the center is the smallest. The distribution of soil resistance under the cap will be more uniform, if the sectional area of soil core is enlarged within a certain range. Due to the existence of cap, there is a “weakening effect” in inner shaft resistance of the upper wall segments, and there is “enhancement effect” in the lower wall segments and in toe resistance. The load shearing percentage of soil resistance under the cap is 10%-20%. It is unreasonable to ignore the effects of the cap and the soil resistance under the cap in bearing capacity calculations.

关键词： diaphragm wall     bridge foundation     low cap     interaction    

HTML PDF 收藏

高强钢筋混凝土预制弧板井壁力学特性分析

荣传新,王秀喜,程桦

《中国工程科学》 2005年 第7卷 第7期   页码 43-49

摘要：

对高强钢筋混凝土预制弧板井壁结构的研究表明，实验结果与数值计算结果基本一致。高强钢筋混凝土预制弧板井壁结构具有很高的承载能力，影响其承载能力的主要因素依次为混凝土的强度等级、厚径比和配筋率。在均布荷载作用下，混凝土的强度等级提高10MPa，极限承载力提高1.26MPa。厚径比每增加1%，极限承载力增加0.85 MPa。增大配筋率对提高其极限承载力作用不大，配筋率增大3倍，极限承载力只增加了0.1MPa。

关键词： 高强钢筋混凝土预制弧板井壁     力学特性     有限元法     ANSYS    

HTML PDF 收藏

The behavior of a rectangular closed diaphragm wall when used as a bridge foundation

Qiangong CHENG, Jiujiang WU, Zhang SONG, Hua WEN

《结构与土木工程前沿（英文）》 2012年 第6卷 第4期   页码 398-420 doi: 10.1007/s11709-012-0175-5

摘要： The rectangular closed diaphragm (RCD) wall is a new type of bridge foundation. Compared to barrette foundation, measuring the performance of RCD walls is relatively complicated because of their incorporation of a soil core. Using the FLAC3D software, this paper investigates the deformation properties, soil resistance and skin friction of a laterally loaded RCD wall as well as the settlement, axial force and load-sharing ratio of a vertically loaded RCD wall. Special attention is given to the analysis of factors that influence the performance of the soil core. It was found that under lateral loading, the RCD wall behaves as an end-bearing friction wall during the entire loading process. The relative displacement between the wall body and the soil core primarily occurs below the rotation point, and the horizontal displacement of the soil core is greater than that of the wall body. Under vertical loading, the degree of inner skin friction around the bottom of the soil core and the proportion of the loading supported by the soil core increase with increased cross-section size. The wall depth is directly proportional to the loading supported by the outer skin friction and the tip resistance of the wall body and is inversely proportional to the loading borne by the soil core.

关键词： diaphragm wall     soil core     bridge foundation     FLAC3D     bearing behavior    

HTML PDF 收藏

标题 作者 时间 类型 操作

Seismic response of precast reinforced concrete wall subjected to cyclic in-plane and constant out-of-plane

期刊论文

Effect of earth reinforcement, soil properties and wall properties on bridge MSE walls

期刊论文

Self-centring segmental retaining walls—A new construction system for retaining walls

期刊论文

Factors affecting the seismic behavior of segmental precast bridge columns

Haitham DAWOOD,Mohamed ELGAWADY,Joshua HEWES

期刊论文

Seismic performance of precast hollow bridge piers with different construction details

Zhiqiang WANG,Jiping GE,Hongyi WEI

期刊论文

Ductility improvement of GFRP-RC beams using precast confined concrete block in compression zone

期刊论文

Flexural and longitudinal shear performance of precast lightweight steel–ultra-high performance concrete

期刊论文

Dynamic response of precast segmental bridge columns under heavy truck impact

期刊论文

Structural performance of a façade precast concrete sandwich panel enabled by a bar-type basalt fiber-reinforced

期刊论文

Construction Technology of Off-Site Precast Concrete Buildings

Ting Gong,Jian Yang,Hao Hu,Feng Xu

期刊论文

Numerical simulation of squat reinforced concrete wall strengthened by FRP composite material

Ali KEZMANE,Said BOUKAIS,Mohand Hamizi

期刊论文

Nonlinear analysis of pre-tensioned glass wall facade by stability function with initial imperfection

Siu-Lai CHAN, Yaopeng LIU, Andy LEE,

期刊论文

Diaphragm wall-soil-cap interaction in rectangular-closed- diaphragm-wall bridge foundations

Hua WEN, Qiangong CHENG, Fanchao MENG, Xiaodong CHEN

期刊论文

高强钢筋混凝土预制弧板井壁力学特性分析

荣传新,王秀喜,程桦

期刊论文

The behavior of a rectangular closed diaphragm wall when used as a bridge foundation

Qiangong CHENG, Jiujiang WU, Zhang SONG, Hua WEN

期刊论文